FEULING PARTS Cam Kit - 487 - Chain Drive - Race Series Lifters - M8 - 1462

Cam Kit - 487 - Chain Drive - Race Series Lifters - M8

• 487 Reaper Chain Drive Camshaft, Cam Installation Kit and Race Series Lifters are included in this kit
  

           487 Reaper Camshaft

• • Bolt in
  • Chain Drive
  • 38° overlap
  • RPM range 2,250 - 6,1000
  • Camshaft for 114" and 117" engine
  • Responds very well to increased bore and or compression
  • Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock
    

             Notes: Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio

           Cam Installation Kit

• • Includes cam bearing, cam/crank hardware and gasket/O-ring kit
  • Allows for installation of the factory one piece pushrods or optional Feuling® heavy duty HP+® 0.165 wall one piece pushrods
    

           Race Series Lifters

• • Hydraulic lifters have a full 0.200 of total travel
  • Designed with a slower bleed down rate to handle heavy valve spring pressures
  • Increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the Milwaukee Eight front exhaust camshaft lobe flange
  • Made in the USA

         Note: 

• • Heavy duty one piece pushrods are highly recommended.
  • Feuling® fastener kit is recommended to help prevent cylinder head cracking.
  • A high flow exhaust system and air cleaner is highly recommended for optimal performance.
  • High Lift valve springs are required on stock cylinder heads, Screamin Eagle cylinder heads have high lift valve springs but will need to be verified.
  • Feuling® does not recommend tuning beyond stock emissions standards

• Mfg No. 1462