***SOME OF THE PHOTOS SHOW A BACK CUT MUFFLER BUT THIS PIPE HAS A STRAIGHT CUT MUFFLER***
2:1 Fat Cat is a stepped header system at the head is 1 5/8" to 1 3/4" to 1 7/8" at collector and 2 1/2" where the muffler goes to the header.
All Fat Cat full systems are equipped with heat shields,bolt kit and baffles.
All D&D full systems are equipped with heat shields,exhaust gaskets, bolt kit and baffles.
Each exhaust system is designed and dyno tested in our facilities.
Our testing is done with the Harley Tuner's.
Every pipe is designed to increase low-end torque and horsepower.
Performance increases are about 8 to 10 percent with the proper tune on the bike.
Perforated Wrapped baffles are for Stage 4 103" to 113" motors
Using Woods cams for best performance use the Perforated Wrapped Baffle
1995-2006 Fat Cat comes with 18mm O2 bungs for the stock 02 sensors that comes on the bike.
All 1995-2006 Touring models require tuning with our exhaust.
The length of the system with the muffler is too short to use with Extended bag. We offer extended length muffler for bikes that have stretch bags. We will send a special order form to fill out.
There is a upcharge of $250.00 per muffler.
At idle, the motorbike is deep, boomy and full of character. Not only does the pipe look good, it is a wonderfully sounding experience for the rider.
Blueing and Discoloration are caused by Improper Tuning and will not be covered under Warranty
D&D Performance Exhaust Systems are designed for close course racing applications only.
Not for use on pollution controlled vehicles.
Our exhaust systems are designed around stock configurations. If your motorcycle has modifications such as Lowered Suspension, Shocks, or Aftermarket Saddlebags, the exhaust system may not work as intended.