Feuling Oil Pump Corp.

Feuling Cam Plate, Fits 07-17 Twin Cam and 06 Dyna

0925-0110

Regular price $349.95 Save $-349.95

For 07-17 Twin Cam (and 06 Dyna). For chain or gear drive cams.HIGH FLOW CAMPLATES FOR TWIN CAM. Increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages. Camplate matches the oil port holes throughout the camplate to the port holes in the engine case increasing engine oil flow throughout the engine. 25-35 degree cooler engine temperatures and 20-30 degree cooler oil temperatures. Made from 7075 billet aluminum which is 50% harder and stronger than the factory, SE® and other aftermarket camplates. The 7075 increases the strength and hardness of the camplate, holding tighter tolerances under temperature eliminating flexing and the need for bronze bushings. Camplates are pressure tested and pressure relief valve is seated, sealed and set to pop off at 55-60 psi. When matched with the Feuling® Race Series oil pump rear wheel power gains of 3 Horsepower and 4 ft/lbs of Torque can be achieved. For use ONLY with the Feuling® oil pumps. Camplates for 99-06 Twin Cam (except 06 Dyna) have tighter cam bearing bore tolerances for improved press fit. Bearing and retainer plate hardware is included. Camplates for 07-17 Twin Cam (and 06 Dyna) have tighter cam journal tolerance for improved cam fitment. Added cam journal oil groove for cold startup protection and increased cam journal lubrication. Added oil pressure feed holes to front and back of cam journals to prevent excessive thrusting wear. Made in the U.S.A. - Part Number - 0925-0110