Feuling Oil Pump Corp.

Feuling Cam 405, Fits 17-19 M-Eight

0925-1163

Regular price $269.95 Save $-269.95
5 in stock

REAPER® 405 CAMS FOR 17-19 M-EIGHT. Produce more power and torque in the riding rpm range, improving throttle response, acceleration and fuel mileage. Smooth camshaft lobe ramps are easier on valvetrain components and eliminate excessive valvetrain noise and wear. Dyno proven and track tested. Made in the U.S.A.. 405 CAM. Produces a wide powerband that increases torque and horsepower throughout the entire rpm range. Direct bolt-in replacement for M-Eight engines; can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well when used with slip-on mufflers or full exhaust system and a high-flow air cleaner. Feuling recommends mufflers with smaller cores for the best low-rpm power. RPM range 1700 - 5700. 465 CAM. Produces solid bottom-end performance and substantial gains above 2800 rpm compared to the stock cams. Direct bolt-in replacement for M-Eight engines; can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well when used with slip-on mufflers or a full exhaust system and a high-flow air cleaner. Use of performance valve springs is not required but may result in a quieter, smoother-running valve train. Responds well when combined with increased engine bore and/or engine compression. RPM range 1850 - 5950. 521 CAM. Aggressive pulling power with a "nasty" sound, the Reaper 521 grind will shine in 114" and larger cubic inch engines with added compression ratio. 521 CAM. Ported cylinder heads are not required, but will complement the cam and add even more pulling power throughout the range. Stock throttle body produces an excellent powerband; use of a high flow throttle body may increase peak power numbers. A high-flow exhaust system and air cleaner is highly recommended for optimal performance. - Part Number - 0925-1163