For 02-16 FLHT/FLHR/FLHX/FLTR Models. COVER CAM CLRTY FLH CH. CLARITY CAM COVERS. Black Ops. Allows for viewing of the internal moving engine components. CNC-machined from billet aluminum. PART #s 0940-1128, 0940-1129, 0940-1130 have a thinner design with smaller windows for additional exhaust clearance; will fit 02-16 Twin Cam models where this is needed. Hardware included. Available with chrome, Contrast Cut™ and Black Ops™ finishes. Matching Clarity air cleaner and derby cover available. Made in the U.S.A.. The RSD Clarity Cam Covers contain two pre-installed Lexan® polycarbonate windows. These windows are very resistant to almost everything a motorcycle will be exposed to. However, extra care and preparation must be taken wheninstalling the cam cover near the exhaust system. The Lexan® polycarbonate windows must be at least 5/16" away from the exhaust pipe to insure the temperature does not exceed the capabilities of the Lexan®. Additional clearance is recommended to preserve the optical clarity of the Lexan® window as well as reducing the amount of heat introduced to the engine from the exhaust. Take measurements when installing the exhaust system and make sure that the exhaust NEVER contacts the Lexan® windows, bolts or the aluminum cam cover. Lexan® is very durable but it must be treated just like any plastic and cannot come into contact with the exhaust pipes. The Lexan® windows, just like any plastic, will melt if in direct contact with the exhaust pipe. If the Lexan®? windows have less than adequate clearance premature discoloration, cracking or melting may occur causing severe failure and/or possible injury to the rider. RSD recommends the use of "high pipes" or exhaust that runs above the cam cover, which eliminates any potential exhaust contact.TECHNICAL GUIDELINES FOR CLARITY CAM COVER:1. There must be at least 5/16" between the exhaust and the Lexan®? windows, bolts and cover.2. Absolutely no contact between the Lexan® windows, bolts or aluminum cam cover. 5. CLARITY CAM COVERS. Allows for viewing of the internal moving engine components. CNC-machined from billet aluminum. PART #s 0940-1128, 0940-1129, 0940-1130 have a thinner design with smaller windows for additional exhaust clearance; will fit 02-16 Twin Cam models where this is needed. Hardware included. Available with chrome, Contrast Cut™ and Black Ops™ finishes. Matching Clarity air cleaner and derby cover available. Made in the U.S.A.. The RSD Clarity Cam Covers contain two pre-installed Lexan® polycarbonate windows. These windows are very resistant to almost everything a motorcycle will be exposed to. However, extra care and preparation must be taken wheninstalling the cam cover near the exhaust system. The Lexan® polycarbonate windows must be at least 5/16" away from the exhaust pipe to insure the temperature does not exceed the capabilities of the Lexan®. Additional clearance is recommended to preserve the optical clarity of the Lexan® window as well as reducing the amount of heat introduced to the engine from the exhaust. Take measurements when installing the exhaust system and make sure that the exhaust NEVER contacts the Lexan® windows, bolts or the aluminum cam cover. Lexan® is very durable but it must be treated just like any plastic and cannot come into contact with the exhaust pipes. The Lexan® windows, just like any plastic, will melt if in direct contact with the exhaust pipe. If the Lexan®? windows have less than adequate clearance premature discoloration, cracking or melting may occur causing severe failure and/or possible injury to the rider. RSD recommends the use of "high pipes" or exhaust that runs above the cam cover, which eliminates any potential exhaust contact.TECHNICAL GUIDELINES FOR CLARITY CAM COVER:1. There must be at least 5/16" between the exhaust and the Lexan®? windows, bolts and cover.2. Absolutely no contact between the Lexan® windows, bolts or aluminum cam cover. - Part Number - 0940-1130